|
|
Enter
the quantity of each item that you want to purchase.
Press the ADD button to place it in
your Shopping Cart. |
Description
of Item
Item
Number
 |
Price
|
Qty
to
Order |
Add
Item |
| MRC's Black Box |
.GIF)
This device will play sound on analog layouts.
Extremely Important: this will operate ONLY with dual mode decoders such as are found in the Bachmann Sound DD40AX and the Broadway Limited Sound Equipped Locos - New production. It may not operate properly with the MRC decoders shown below.
The black box is simply installed between your standard power supply and the track. It will then allow you to operate the sounds provided in the above locos.
The MRC 1050 is temporarily out of production - supplies are extremely limied.
If you have DCC you DO NOT NEED IT. If your locos are not dual mode decoder equipped -- it may not work. Recommended only for locos listed above..
|
| N
Scale Diesel Sound Decoders |
Prices
shown on this page are for MRC Decoders only. Locos are NOT included. |
Plug
'n Play Sound Board - click on photo for link to InterMountain
FP-7's |
Plug
'n Play Sound Board - Atlas SD50, SD60, SD60M Locos |
- MRC
surges forward with another miracle of N-Scale decoder
engineering: with no connectors, no wiring, no machining,
no “dremeling”… the easiest decoder
installation possible. N-Scale railroaders can install
this one piece sound decoder/speaker combination that
replaces the factory installed printed circuit board,
by simply removing the loco body, unclipping the factory
unit, and dropping in the 1644 decoder.
- MRC’s “Brilliance™” sound,
miniaturized to a single drop-in decoder with board
mounted super-fidelity speaker, is virtually “plug ‘n
play”. Just imagine… all 28 NMRA available
functions, and your choices of multiple bells & numerous
horns to give “life” to your DCC N-Scale
loco’s. MRC makes
available a choice of (33) horns, eight-bells, brakes,
air releases, pop
valves,
cooling
fans, coupling
sounds and more. Directional lighting is
included too… to
give “life” to your Kato N-Scale loco’s.
- We
haven’t forgotten power pack users! MRC’s
sound decoders are dual-mode decoders so DC railroaders
can get brilliantly synchronized diesel rumble sounds
on their layout as well. Requires "Black Box" shown
below for non-DCC layouts.
|
Plug
'n Play Sound Board for Kato GE AC-4400 and EMD SD70
MAC's
Important: This does not fit Kato's SD70ACe's |
Plug
'n Play Sound Board for Kato P-42 Genesis. Also
fits Kato E8's! |
MRC
1658 is discontinued. Click on photo above for new
decoder |
New
Plug 'n Play Sound Board for Kato SD40-2 |
New
Plug 'n Play Sound Board for Kato SD-80/90 MACS |
New
Plug 'n Play Sound Board for Kato F40PH Click on photo
above for F40PH listing of available locos from Kato. |
Synchronized
Diesel Sound Decoder for Atlas Diesels |
- Synchronized diesel prime mover with randomly
associated locomotive sounds
- User selectable 15 different horns and 8 bells
- 19 accessory functions allowing more sound control
- Programmable individual sound volumes
- 0.75 amp capacity
- Programmable start voltage, acceleration and deceleration
rate, top voltage and 14,28, 128 speed steps
- Selectable factory default speed curve
- Directional lighting (FO) at 0.2 amp rate
- Supports advanced consisting (CV19) and programming on
the main (OPS mode)
- Compatible with NMRA DCC standards
- Complies with Part 15 of FCC
- 13x18 speaker included
- Directly replaces most Atlas N scale loco's PC Boards
|
| N
Scale Steam Power Sound Decoders |
|
|
- Synchronized
steam chuff with random sounds
- 12
selectable chuff sounds (4 regular/4 articulated)
- User
selectable 12 different whistles and 4 bells
- 1.0
amp capacity
- Programmable
individual sound volumes
- Programmable
for either 2-digit (1-127) or 4-digit (1-9999) addresses
- Programmable
start voltage, acceleration and deceleration rate,
top voltage and 14,28,128 speed steps
- Selectable
factory default speed curve
- Directional
lighting control for front and rear lights at 0.2 amp
rate
- Programmable
chuff rate and chuff starting point
- Compatible
with NMRA DCC standards
- Complies
with the part 15 of FCC
- 17mm
speaker included
|
| N
Scale Drop-In DCC Decoders w/Out Sound |
- MRC
has launched a new series of N Scale DCC Drop-In installation
decoders without Sound. These have
1.0 amp capacity and will work with all NMRA compatible
DCC Systems.
- Directly
replaces original PC board.
- Programmable
start voltage, acceleration and deceleration rates.
The Decoders in the series listed below are Without Sound!
|
|
|
|
|
NCE
Decoders
|
TCS
Decoders
|
|
|
Home
Page 
.GIF)